Product Filter

Product Request

D-FS 50
Furnace camera

Compact furnace camera with air or water cooling for visualization of combustion chambers, combustion processes, flames and other hot processes.

Functionality: Digital furnace camera

Features

Digital real-time images with a resolution of 1,400 x 1.050 pixels
High-speed lens with better optical resolution than the camera used
Wide and flexible angle of view from 30 … 90°
Can be used at up to 2,000 °C in the combustion chamber
Can be expanded into a thermography and analysis system with the D-VTA 200 software

Brilliant live images from the combustion chamber around the clock
Detection of radiation and process fluctuations: The exposure time is not automatic and can be set by remote control, which means that radiation fluctuations in the process or flames are detected immediately
Wide angle of view into the combustion chamber, as the furnace camera penetrates through the furnace wall into the chamber
Low maintenance costs: Thanks to the high-temperature lens, a retraction unit is generally not required
Flexible system: The furnace camera can be expanded into a thermography system with the thermography software D-VTA 200

Monitoring of the out burning zone in grate fired furnaces for waste or biomass incineration
Monitoring of temperature distribution on and above the grate in waste incineration or biomass power plants
Visualization of combustion in power plant boilers with coal, oil or gas combustion

Video resolution	D-FS 50 ... IP04 ... : 1,280 x 960 pxD-FS 50 ... IP09 ... : 1,400 x 1.050 px
Video signal	Digital, GigE Vision, compatible with D-VT 50 and D-VTA 200
Field of view	D-FS 50 VIS90… : 90°, 72°, 54° (diagonal, horizontal, vertical)D-FS 50 VIS60… : 60°, 48°, 36° (diagonal, horizontal, vertical)D-FS 50 VIS30… : 30°, 24°, 18° (diagonal, horizontal, vertical)
Temperature measurement range	600 … 2,000 °C using the thermography software D-VTA 200
Cooling media and purge air	D-FS 50 … A60 (air-cooled):Connections: 2x G1/2″ external threadPurge air: > 10 Nm3/h at T < 45 °CCooling air: > 30 Nm3/h at T < 45 °C D-FS 50 … W70 (water-cooled):Connections: 3x G1/2″ external threadPurge air: > 10 Nm3/h at T < 45 °CCooling water: > 500 l/h at T < 45 °C and p > 2.5 bar
Pressure in combustion chamber	-100 … +100 mbar
Electrical connection	12 VDC, < 10 VA (via D-SCU)
Maximum permitted temperature in combustion chamber	2,000 °C (D-FS 50 … W70-xxxx)1,600 °C (D-FS 50 … A60-xxxx)
Ambient temperature	-30 … +60 °C -30 … +80 °C (with purge air)
Temperature monitoring	PT100 at the sensor tip
Degree of protection	IP66
Connections	1x GigE M121x 4-pin M12
Dimensions	d = 60 mm (D-FS 50 … A60)d = 70 mm (D-FS 50 … W70)See drawings for further dimensions
Weight	6.4 kg (D-FS 50 … W70-700)4.2 kg (D-FS 50 … A60-700)

D-FS NW cable 10GB M12
D-FS cable 4-pin M12